Essick EA1201 User Manual download pdf (Page 6)

CONTROLS AND OPERATION

1. Plug cord into wall

receptacle. Your

humidifier is now

ready for use. The

humidifier should

not be near any

heat registers.

2. Place the unit at

least FOUR inches

away from any

walls. Unrestricted

airflow into the unit

will result in the best

efficiency and

performance.

3. The digital touch screen panel allows you to control the fan speed and humidity

level by simply tapping the appropriate up or down arrow switch on the front of the

panel.

4. A digital display provides information on the status of the unit. Depending on which

function is being accessed, it displays ambient and set humidity, fan speed and

status of the unit.

FAN SPEED

5. Tap the up arrow or down arrow on the FAN SPEED section to

adjust the fan. The display will show F1 through F9 proceeding

from low to high speed.

NOTE: When excessive condensation exists, a lower speed setting is

recommended.

HUMIDITY CONTROL

NOTE: The EA12 series has an adjustable humidistat that cycles the humidifier

on and off as required to maintain the selected setting.

6. At initial startup the ambient humidity of the room will be displayed.

7. Tap the up or down arrow in the HUMIDITY SET section of the panel to adjust

the humidity level in 5% increments. At 65% set point, the unit will operate

continuously.

OTHER INDICATIONS

8. When the unit runs out of water the control will display a flashing ”F”. When

the unit is completely out of water, the motor will shut off.

9. This humidifier has a check filter reminder timed to appear after 720

hours of operation. When the Check Filter (CF) message is

displayed, disconnect the power cord and check the condition of the

filter. The CF function is reset after plugging the unit back in.

CONTROL LOCK OUT

To avoid unwanted tampering with the humidifier settings the controls can be locked.

Activation Procedure

10. After the humidifier functions have been set up, press and hold the

power button down for 5 seconds. The display will show “CL” for 5

seconds; release the power button and the control will resume the

display of the room humidity.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comments to this Manuals

No comments

Essick EA1201 User Manual Page 6

Comments to this Manuals

Related products and manuals for Humidifiers Essick EA1201