Essick EP9R 500 Owner's Manual download pdf (Page 6)

CONTROL PANEL

This unit has a digital control panel that allows you to adjust fan speed and humidity

level, as well as view information on the status of the unit. The display will also indicate if

the optional Remote Control is in use at the time. Remote is included with models EP9R

500 and EP9R 800, or can be purchased separately and used with any EP9 series unit.

See parts list at back to order part number 1999 .

CAUTION: If a plant is placed on the pedestal, ensure no water is poured onto the

control panel when watering the plant. If water enters the electronic control panel,

damage may result. If controls get wet, let them dry completely and have unit

checked by authorized service personnel before plugging in.

1) The digital controller has a display that provides information on the status of the unit.

Depending on which function is being accessed, it displays relative humidity, fan

speed, set humidity and indicates when the unit is out of water.

FAN SPEED

2) The Speed button controls the variable speed motor. Nine

speeds provide precise fan control. Press the power button

and select fan speed: F1 through F9 proceeding from low to

high speed. The initial default setting is high (F9). Adjust as

desired.

3) The initial default setting is high (F9). Adjust as desired. The

fan speed will display on the control panel as the speeds are

stepped through.

NOTE: When excessive condensation exists, a lower fan speed setting is recommended.

HUMIDITY CONTROL

NOTE: Allow 10 to 15 minutes for the humidistat to adjust to the room

when setting up the unit for the first time.

NOTE: The EP Series has an automatic humidistat located on the

ord that measures the relative humidity in the room. When the

elected humidity level drops 3% below the relative humidity, the

umidifier cycles on and off as required to maintain the selected

etting.

1) At initial startup the relative humidity of the room will be

displayed. Each successive push of the Humidity Control

Button will increase the setting in

Each successive push of the Humidity Control Button will increase the setting in

5% increments. At 65% set point, the unit will operate continuously.

DIGITAL

DISPLAY

FAN SPEED

HUMIDITY CONTROL

ON/OFF BUTTON

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

No comments

Essick EP9R 500 Owner's Manual Page 6